産品中心 > 異質結電池設備 > HIT制絨清洗設備

HIT制絨清洗設備

SC-CSZT6000E-28F
對高效太陽能電池異質結電池片進行制絨、清洗設備
  • 産品詳細

設備名稱 Equipment Name
· HIT制絨清洗設備 HIT Texturing Equipment

設備型號 Equipment Model
· SC-CSZT6000E-28F

設備用途 Equipment Application
· 對高效太陽能電池異質結電池片進行制絨、清洗
 Used for texturing and cleaning of high Efficiency Heterojunction solar cells

工藝流程  Process Flow

H2O2工藝  H2OProcess
· SC1處理→純水清洗→去損傷→純水清洗→制絨→純水清洗→純水清洗→PSC1→純水清洗→化學抛光(HNO3)→純水清洗→SC2處理→純水清洗→氫氟酸洗→純水清洗→預脫水→烘幹
 SC1 Treatment-DI Water Rinsing-Saw Damage Removal-DI Water Rinsing- Texturing- DI Water Rinsing-DI Water Rinsing-PSC1-DI Water Rinsing- Chemical Polishing(HNO3)-DI Water Rinsing-SC2 Treatment-DI Water Rinsing-HF Cleaning-DI Water Rinsing-Hot Water Drying-Warm Air Drying.

O3工藝  O3 Process
· 預清洗(O3)→純水清洗→去損傷→純水清洗→制絨→純水清洗→純水清洗→PSC1→純水清洗→化學抛光(O3)→純水清洗→SC2處理→純水清洗→氫氟酸洗→純水清洗→預脫水→烘幹
 Pre-Cleaning (O3)-- DI Water Rinsing-Saw Damage Removal-DI Water Rinsing- Texturing- DI Water Rinsing-DI Water Rinsing-PSC1-DI Water Rinsing- Chemical Polishing(O3)-DI Water Rinsing-SC2 Treatment-DI Water Rinsing-HF Cleaning-DI Water Rinsing-Hot Water Drying-Warm Air Drying.


技術特點  Features

· 兼容MES、UPS和RFID功能。

  Suitable with MES, UPS and RFID function.

· 機械手分配合理,有效避免藥液交叉汙染和槽體反應超時。

  Reasonable distribution of the lifts which can avoid cross-contamination of chemical liquid and reaction overtime of process bath effectively.

· 結構布局緊湊合理,酸性區域、堿性區域、高潔淨區域采用隔斷區分,設備占地空間小。

  With compact and reasonable structural layout,acid area ,alkaline area and high cleanness area separated by partition, with small footprint.

· 先進的400片雙層槽結構,有效提高設備工藝産能。

  Advanced 400pcs double-layer bath structure improves the throughput effectively.

· 工藝槽體采用“定排定補”模式和“時間補液”模式相結合,有效延長藥液使用壽命和減少換液周期。

  Process baths combine the “feed & bleed” Mode with“Time Dosing” Mode, extend the bath lift time and reduce the bath change period effectively.

· 補配液采用槽內與補液罐雙磁致伸縮流量計線性檢測,以及可調節氣閥控流結構,有效保證初配時間和微量精補配液的精度。

  Dosing and Make-up adopt linear detection of the double magnatostrictive flowmeter inside the bath and the dosing barrel, as well as adjustable valve flow control structure to ensure the time of initial make-up and accuracy of accurate dosing effectively.

· 所有與液體接觸材料優化升級,避免材料使用雜質析出。

  Optimize and upgrade all materials in contact with process liquid to avoid precipitation of impurities.

· 采用最新低溫烘幹技術,保證槽內潔淨度和溫度控制精度,提高制絨後少子壽命。

  With the latest low-temperature drying technology to ensure the cleanliness and temperature control accuracy inside the bath, increase the minority carrier lifetime of solar cells.


設備參數  Parameters